Siemens SCALANCE XR-300WG User Manual

6.3.5.18 spanning-tree restricted-role
Description
With this command, you prevent the port adopting the role of root port.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
spanning-tree restricted-role
As default the function is "disabled".
Result
The port is prevented from adopting the role of root port.
Further notes
You cancel the lock with the no spanning-tree restricted-role command.
You can display the status of this function and other information with the show spanning-
tree detailcommand.
6.3.5.19 no spanning-tree restricted-role
Description
With this command, you release the port for the role as root port.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
Network structures
6.3 Spanning Tree
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 257

Siemens SCALANCE XR-300WG Specifications

General

Brand	Siemens
Model	SCALANCE XR-300WG
Category	Switch
Language	English