3.1.1.11 show pnio
Description
This command shows the current PROFINET configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
Thiscli> or cli#
Syntax
Call the command without parameters:
show pnio
Result
The current PROFINET configuration is displayed.
3.1.1.12 show lldp neighbors
Description
This command shows the current content of the neighborhood table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show lldp neighbors
Result
The neighborhood table is displayed.
Configuration
3.1 System
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 55
To Next Page
Loading...
Need help?
General