cli(config)#
Syntax
Call the command without parameters:
ip igmp vlan-snooping
Result
IGMP snooping is enabled for all VLANs.
Further notes
You disable IGMP snooping with the no ip igmp vlan-snooping command.
8.2.2.3 no ip igmp vlan-snooping
Description
With this command, you disable IGMP snooping for all VLANs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip igmp vlan-snooping
Result
IGMP snooping is disabled for all VLANs.
Further notes
You enable IGMP snooping with the ip igmp vlan-snooping command.
Layer 2 management protocols
8.2 IGMP snooping
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 381
To Next Page
Loading...
Need help?
General