7.8 HTTPS server
This section describes commands of the Hypertext Transfer Protocol Secure (HTTPS).
7.8.1 The "show" commands
This section describes commands with which you display various settings.
7.8.1.1 show ip http secure server status
Description
This command shows the status of the HTTPS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip http secure server status
Result
The status, cipher suite and version of the HTTPS server are displayed.
7.8.1.2 show ssl server-cert
Description
This command shows the SSL server certificate.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Network protocols
7.8 HTTPS server
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 361
To Next Page
Loading...
Need help?
General