Siemens SCALANCE XR-300WG User Manual

cli> or cli#
Syntax
Call the command without parameters:
show hardware
Result
The table of interface cards is displayed.
The slot ID, the status and the type or name of the card is listed.
Note
With SCALANCE XB-200, SCALANCE XC-200, SCALANCE XP-200 and SCALANCE
XR-300WG the slot ID is always 0. The table therefore always shows precisely one row.
3.1.1.7 show im
Description
This command shows information on device-specific vendor and maintenance data such as
the article number, serial number, version numbers etc.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show im
Result
The information is displayed.
Configuration
3.1 System
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 51

Siemens SCALANCE XR-300WG Specifications

General

Brand	Siemens
Model	SCALANCE XR-300WG
Category	Switch
Language	English