Atlas Copco PowerMACS 4000 User Manual

Set Up and Maintenance
156 9836 3521 01
4.6.7 Motortune page
If you have a service enabled ToolsTalk PowerMACS it is possible to Motortune a spindle.
Press Start Motortune to begin the motortune operation, note that the spindle will run at a very high
speed so it is absolutely critical it is running free. Motortune status can be observed through events.

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English