Peripheral Devices
9836 3521 01 415
8.2 Add a device
You can have a total of 21 devices in a PowerMACS system and up to 6 can be connected to each TC.
To add a device, select a TC in the System Map, right click and select Add Device from the popup menu.
This will bring up a list of devices that can be added
You will be asked to give the new device a name. This name will later be referred to when you create a
Reporter, which will be used to select and format the data sent to the device.
When you have added a device you should configure it. Which parameters that is available depends on
the type of device.
To Next Page
Loading...
Need help?
General
