Atlas Copco PowerMACS 4000 User Manual

Basic Functions
54 9836 3521 01
3.5 How to Start up
Depending on what you want to do you start ToolsTalk PowerMACS in either Connected or Disconnected
mode.
If ToolsTalk PowerMACS was connected when it was last shut down it will try and reconnect to the same
system upon startup.
The Welcome screen
When ToolsTalk PowerMACS is first started it will present a welcome screen containing the most
common starting points for working with ToolsTalk PowerMACS.
From this window it is possible to select Create a new setup to begin working on a new setup in
disconnected mode, select Open an existing setup to open an already saved setup from disk. The option
Select a target system allows you to select the target system to connect to, to connect to the target
system most recently used select Connect to current target system. You can also select one of the
most recently used setups to open in disconnected mode.
If you do not want the welcome screen to be shown when ToolsTalk PowerMACS is started check the Do
not show this again checkbox before closing the window. The welcome screen can be enabled again in
the Setup -- Options.. menu.

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English