Atlas Copco PowerMACS 4000 User Manual

Appendix
9836 3521 01 625
10 Appendix
10.1 List of events
The below table lists the Code, Compact code, Type, Severity and Event string for most events that can
be generated by the system. The compact event code is only used when events are reported from an
Ethernet Open Protocol device.
Code
Comp
Code
Type
Severity
Event string
1
1
Ext. com
Error
Unexpected signal: %d %d %d
2
2
System
Error
DB Get error %d, Proc %d, Case %d
3
3
Hardware
Error
Spurious interrupt %d, %d, %d
4
4
System
Error
Internal error on line %d in class base no %d, ret %d
6
40
Access
Info
Operator login
7
41
Access
Info
Operator logout
8
43
Access
Info
Illegal login
101
9
Power up
Info
Power on
102
10
Hardware
Error
System: Lost connection to TC %d
103
11
Hardware
Info
System: Established connection to TC %d
104
12
Hardware
Error
System: TC %d is of wrong type
105
13
Hardware
Error
System: Spindle TC %d is configured as system TC
106
442
Hardware
Error
System: TC %d is of wrong version
107
443
Hardware
Error
System: TC %d participates in another system
108
444
Hardware
Error
System: TC %d needs coldstart
201
14
Setup
Error
Easy View parameter %d fails in pos %d
202
15
System
Error
Error when reading/writing ODB image (err=%d)
203
16
System
Error
Error when reading ODB image (ODB seq.=%d, my seq.=%d)
204
431
System
Error
Error when receiving (type=%d, d1=%d, d2=%d)
205
432
System
Error
PLC ZIP file access error (access=%d, info=%d)
207
625
Setup
Info
New setup loaded
208
626
Setup
Info
Program changed
501
901
System
Error
Trying to read event that no longer exists (missing %d)
601
18
System
Warning
Start is impossible since there are no active spindles
603
20
System
Error
Bolt %d is connected to invalid spindle %d

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English