Atlas Copco PowerMACS 4000 User Manual

Tightening
282 9836 3521 01
6.5.2.7 A - Run until Angle
Step type Id: 6
Parameters: A (Angle), DIR (Direction), Start condition.
Function: Run spindle, in DIR direction, until angle A has passed.
Diagram :
Angle
Torque
A Angle
A
Step
Trace: Angle A is shown as a horizontal line from step start to step stop in trace when Angle vs.
Time is selected. Control parameters must be enabled in the trace form (see View of
trace curves).

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English