4 Scan
124
Scan
4
Scanning Procedure
This section describes basic scan operations. The following shows the scan flow and
reference sections.
Step 1 Loading Documents.......................................................................................................124
Step 2 Selecting Features ..........................................................................................................126
Step 3 Starting the Scan Job......................................................................................................128
Step 4 Confirming the Scan Job in the Job Status ....................................................................129
Step 5 Saving the Scanned Data ...............................................................................................129
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
z
Single sheet
z
Multiple sheets
Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 140 × 210mm (A5, A5 , 5.5 × 8.5 inches, 5.5 × 8.5 inches ) to a
maximum of 297 × 432mm (A3, 11 × 17 inches).
The document feeder can auto-detect only documents of standard sizes. For
documents that of not of a standard size, enter the size in the [Scan Size] field.
For information about entering a custom size, refer to "Scan Size (Specifying a Scanning Size)" (P.158).
Note • The standard document sizes that can be auto-detected depend on the [Paper Size
Settings] in the System Administration mode. For more information, refer to "Paper Size
Settings" (P.318)
The document feeder accept the following number of sheets.
For information about scanning documents of mixed size, refer to "Mixed Size Originals (Scanning
Different Size Documents Simultaneously)" (P.159).
Important • Place folded or creased documents on the document glass because they may cause paper
jams.
Document Type (weight)
Number of
sheets
Lightweight paper (38-49g/m
2
) 250 sheets
Plain paper (50-80g/m
2
) 250 sheets
Heavyweight paper (81-128g/m
2
) 150 sheets
Heavyweight paper (129-200g/m
2
) 100 sheets