4 Scan
144
Scan
4
2 Enter values using the keyboard
displayed.
For information about entering text, refer
to "Entering Text" (P.296).
îš„Server
Displayed when either [FTP] or
[SMB] is selected. Enter either the server name or server IP address. Up to 64
characters are allowed.
Example Server Name: myhost.example.com
(myhost: Host Name, example.com: Domain Name)
îš„Shared Name
Displayed when [SMB] is selected. Enter the Shared Name. Up to 64 characters are
allowed.
îš„Save in:
Displayed when either [FTP] or [SMB] is selected. Enter a directory. Up to 128
characters are allowed.
îš„Save in
Displayed when [SMB (UNC Format)] is selected. [Enter [\\Host Name\Shared
Name\Directory Name]. Up to 260 characters are allowed.
îš„Login Name
Enter the login name for the computer or the FTP server you are forwarding to. 32
characters are allowed. When forwarding using SMB, this field can be omitted if the
recipient does not require it.
îš„Password
Enter the password for the login name. 32 characters are allowed.
Output Color
Note • This feature is only supported by DocuCentre 9000 with Scanner.
For information about the feature, refer to "Output Color (Selecting a Color Mode)" (P.146).
Lighten/Darken
For more information, refer to "Lighten/Darken (adjusting the Scan Density)" (P.147).
2 Sided Originals
For more information, refer to"2 Sided Originals (Scans Both Sides of the Document)" (P.147).
To Next Page
Loading...
Need help?
General
