15 Problem Solving
544
Problem Solving
15
Solving Curled Output
You can correct the curling of the output by pressing the De-curl button.
The De-curl button functions both in suspension and in operation if the power of the
machine is on.
Note • To change the curling correction mode while the machine is in operation, press the De-curl
button and then the change will be applied immediately.
• Pressing the Reset button on the control panel cannot change the curling correction mode.
1 Check how the output copy is
curled.
2 Check that De-curl lights up.
• When turning on the power of
this machine, the de-curl
mode is set to Auto.
• When you cancel the Power
Saver Mode, the de-curl mode
will be set to Auto.
3 Press De-curl.
Note • Pressing the De -curl button toggles the mode between Auto, ON, and OFF.
For more information, refer to "Mode and function of De-curl button" (P.545).
To Next Page
Loading...
Need help?
General
