3 Copy
84
Copy
3
Image Shift (Shifting the Image Copy Position)
Copies can be made with the document image position shifted to the left, right, top, or
bottom of the paper or with the document center shifted to the center of the paper. You
can also make copies with a margin added to the top, bottom, left, or right. When
making 2 sided prints, you can set the shift positions for both Side 1 and Side 2.
Note • The image shift amount is set in accordance with the paper. Even if you set copies to be
enlarged or reduced in Reduce/Enlarge, the image shift amount is not affected.
1 Select [Image Shift].
2 Select any item.
3 Select [Original Orientation].
îš„No Shift
Copies are made without the position of the document image being shifted.
îš„Auto Center
Copies are made so that the center of the document matches the center of the paper.
îš„Image Shift/Variable Shift
You can set the margin amount. Set the shift amount within the range from 0 to 50 mm
in 1mm increments.
îš„Side 1
Displays the [Image Shift - Side 1] screen.
For more information, refer to "[Image Shift - Side 1] Screen" (P.85).
îš„Side 2
Displays the [Image Shift - Side 2] screen.
For more information, refer to "[Image Shift - Side 2] Screen" (P.85).
îš„Mirror Shift
When copying with the same setting as Side 1, Check Mirror Shift.
îš„Original Orientation
Refer to "Original Orientation (Specify the Orientation of Loaded Documents)" (P.88).
To Next Page
Loading...
Need help?
General
