3 Copy
64
Copy
3
Basic Copying
You can set the basic features on the [Basic Copying] screen. The following shows the
reference section for each feature.
Reducing/Enlarging (Making Enlarged/Reduced Copies)..........................................................64
Paper Supply (Selecting the Paper to Use for Copying).............................................................67
2 Sided Copying (Making 2 sided Copies) .................................................................................70
Original Type (Selecting the Image Quality Type for the Document) .......................................71
Finishing (Outputting by specifying Finishing)..........................................................................71
Multiple-Up (Copying Multiple Sheets onto One Sheet) ...........................................................71
Lighten / Darken (Adjusting the Copy Density).........................................................................72
1 On the [All Services] screen, select
[Copy].
2 Select features on the [Basic
Copying] screen that appears first.
Reducing/Enlarging (Making Enlarged/Reduced Copies)
You can select a ratio to make enlarged or reduced copies.
1 Select the copy ratio.
îš„100%
Copies are made at the same size
as the document.
îš„Auto%
The copy ratio is automatically set based upon the document and paper sizes specified
in [Paper Supply], and the document is copied to fit in the specified size.
Note • If you select [Auto%], specify a value other than [Auto] for [Paper Supply].
îš„Ratio (3rd to 5th Buttons)
Select from preset ratios.
You can change the indicated ratios. For information about the setting procedures, refer to "Reduce/
Enlarge - Button 3" (P.326) and "Reduce/Enlarge - Button 4" (P.326).
To Next Page
Loading...
Need help?
General
