3 Copy
62
Copy
3
Saving Scanned Documents
Save scanned documents as a data to the mailbox on the machine.
To use mailbox, select [Copy & Save] or [Save Only].
Note • The maximum pages stored in the machine is about 35,000 pages for the A4 portrait. This
figure could be used only as a guide, since the maximum scanned pages depend on the
types, sizes, and direction of the document.
• Up to 100 copied and printed documents can be stored altogether.
1 On [All Services] screen, select
[Copy].
2 Select the feature to be configured
from respective tabs as necessary.
3 Select [Copy & Save] or [Save
Only].
The mailbox must be registered
beforehand. For information about
registering mailboxes, refer to "Mailbox"
(P.371).
4 Specify the box to save data.
Note • If a password is set for the
box, the password entry
screen appears. Enter the
password and select
[Confirm]. If you have
forgotten the password,
reconfigure the box password
in System Administration
mode.
5 Press the <Start> button.
îš„box
This box saves data. Select [ ] to display the previous screen and select [ ] to display
the next screen. Also, select [
] to display the head screen and select [ ] to display
the last screen.
îš„Document Name
Set the document name for saving.
Using the displayed keyboard and the numeric keypad, you can enter up to 20
characters.
For how to input characters, refer to "Entering Text" (P.296).
îš„Go to
Use the numeric keypad to enter a 3 digit box number. That mailbox then appears at
the top of the list.
To Next Page
Loading...
Need help?
General
