10 Setups
340
Setups
10
POP3 Server Settings
Set the POP3 server. In [POP3 Server Settings], you can set the following items.
For information about POP server settings, refer to the Network Administrator Guide.
SMTP Server Settings
Set the SMTP server. In [SMTP Server Settings], you can set the following items.
For information about SMTP server settings, refer to the Network Administrator Guide.
Domain Settings
Set the accepted domains. In [Domain Settings], you can set the following items.
For information about accepted domain settings, refer to the Network Administrator Guide.
Remote Authentication Server Settings
Sets the remote authentication server. Up to 5 servers can be set.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1 Select [Remote Authentication
Server Settings].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen, and select
[ ] to display the next screen.
3 Set the setting value.
4 Press [Save].
Authentication System
You can select the system for authentication from [Kebros (Windows2000)] and
[Kebros (Solaris)].
1. POP3 Server - Setup 5. POP3 Server - Check Interval
2. POP3 Server - IP Address 6. POP3 Server - Login Name
3. POP3 Server - Name 7. POP3 Server - Password
4. POP3 Server - Port Number 8. POP Password Encryption
1. SMTP Server - Setup 5. E-mail Send Authentication
2. SMTP Server - IP Address 6. SMTP AUTH - Login Name
3. SMTP Server - Name 7. SMTP AUTH - Password
4. SMTP Server - Port Number
1. Domain Filtering 2. Domains 1 to 50
To Next Page
Loading...
Need help?
General
