14 Maintenance
464
Maintenance
14
5 Push a new staple cartridge into
the unit.
6 Push the removed unit back to the
original position.
7 Close the Finisher's right cover.
Note • A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
Replacing The Staple Scrap Container
A message is displayed when the staple scrap container is full. Follow the displayed
instruction and replace the staple scrap container.
Important • Replace the staple scrap container while the machine is on.
• When removing the staple scrap container, take care not to injure your fingers by the staple
scraps.
Note • A Staple Scrap Container is included in a Staple Cartridge
for 100 sheets XF.
1 Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
2 Remove the staple scrap container
by holding the R5 firmly.
To Next Page
Loading...
Need help?
General
