10 Setups
316
Setups
10
Set Numbering
You can configure the set numbering. You can lightly print texts or numbers on the
background of each copy set.
1 Select [Set Numbering].
2 Select the item to be set or
changed, and select [Change
Settings].
3 Select the setting value.
4 Press Save.
Date Format
Set the format for printing dates in annotations and set numbering. This setting is
common to annotation and set numbering.
Text Effect
Set the default value for [Text Effect] of [Set Numbering] in the [Output Format] screen
under the copy features.
Text Size
Set the size of the text printed in set numbering.
You can select from three possibilities: 48 point, 64 point, and 80 point.
Background Pattern
Set the background pattern to be used for the set numbering text effect.
You can select from eight patterns: wave, circle, stripes, chain, beam, diamond,
sunflower, and fan.
Density
Set the density for printing the text in set numbering.
You can select from three levels from faint to dark.
Text/Background Contrast
Set the text/background contrast for printing set numbering.
You can select from contrast levels 1 to 9. When level 1 is selected, the level of contrast
is the greatest. Set text/background contrast after checking the results of printing a
[Text Effect Sample List].
For information about sample printing, refer to "Text Effect Sample List" (P.432).
Force Set Numbering - Copy Job
Set whether to force set numbering printing for copying.
Force Set Numbering - Client Print
Set whether to force set numbering printing for printing from a client computer.
To Next Page
Loading...
Need help?
General
