3 Copy
58
Copy
3
Step 3 Entering the Quantity
You can enter up to 9999 for the number of copies.
1 Enter the number of copies using
the numeric keypad. The number
of copies entered appears on the
upper right of the display.
2 If you enter an incorrect value,
press the <C> button and enter the
correct value.
Step 4 Starting the Copy Job
1
Press the <Start> button.
Important • If you loaded the document in
the document feeder, do not
press down on it while it is
being fed into the machine.
Note • If a problem occurs, an error
message appears on the
display. Solve the problem in
accordance with the message
on the display.
• You can set the next job
during copying.
îš„If You Have Another Document
If you have another document, select the [Next Original] on the touch screen while the
current document is being scanned. You can copy multiple documents together.
2 Select [Next Original] while scanning is in progress.
Note • When using the document feeder, load the next document after the machine has finished
scanning the first document.
• When no operation is performed during a certain period of time, the machine automatically
assumes that there are no more documents and performs an automatic reset.
Numeric keypad
<C> button
  
<Start> button
To Next Page
Loading...
Need help?
General
