3 Copy
54
Copy
3
Copying Procedure
This section describes the basic copy operations. The following shows the copy flow
and reference sections.
Step 1 Loading Documents.........................................................................................................54
Step 2 Selecting Features ............................................................................................................56
Step 3 Entering the Quantity.......................................................................................................58
Step 4 Starting the Copy Job.......................................................................................................58
Step 5 Confirming the Copy Job in the Job Status .....................................................................59
Step 1 Loading Documents
There are two methods of loading documents.
îš„Document Feeder
z
Single sheet
z
Multiple sheets
îš„Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 140 × 210mm (A5, A5 , 5.5 × 8.5inches, 5.5 × 8.5inches ) to a
maximum of 297 × 432mm (A3, 11 × 17 inches).
The document feeder can auto-detect only documents of standard sizes. For
documents that of not of a standard size, input the size in the [Original Size] field.
For information about entering a custom size, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.79).
Note • The standard document sizes that can be auto-detected depend on the [Paper Size
Settings] in the System Administration mode. For more information, refer to "Paper Size
Settings" (P.318).
The document feeder can accept the following number of sheets.
For information about copying documents of mixed size, refer to "Mixed Size Originals (Scanning
Different Size Documents Simultaneously)" (P.80).
Important • Place folded or creased documents on the document glass because they may cause paper
jams.
Document type (weight)
Number of
sheets
Lightweight paper (38-49 g/m
2
) 250 sheets
Plain paper (50-80g/m
2
) 250 sheets
Heavyweight paper (81-128g/m
2
) 150 sheets
Heavyweight paper (129-200g/m
2
) 100 sheets
To Next Page
Loading...
Need help?
General
