RESETS
SM 5-7 B064 Series/B140 Series/G126
Service
Tables
B140 Series
No. What It Initializes Comments
1 All Clear Initializes items 2 ~ 15 below.
2 Engine Clear Initializes all registration settings for the engine and copy
process settings.
3 SCS Initializes default system settings, SCS (System Control
Service) settings, operation display coordinates, and ROM
update information.
4 IMH Memory Clear Initializes the image file system.
(IMH: Image Memory Handler)
5 MCS Initializes the automatic delete time setting for stored
documents.
(MCS: Memory Control Service)
6 Copier application Initializes all copier application settings.
7 Fax application Not used.
8 Printer application Initializes the printer defaults, programs registered, the printer
SP bit switches, and the printer CSS counter.
9 Scanner application Initializes the defaults for the scanner and all the scanner SP
modes.
10 Web Service/
Network application
Deletes the Netfile (NFA) management files and thumbnails,
and initializes the Job login ID.
Netfiles: Jobs to be printed from the document server using a
PC and the DeskTopBinder software
11 NCS Initializes the system defaults and interface settings (IP
addresses also), the SmartNetMonitor for Admin settings,
WebStatusMonitor settings, and the TELNET settings.
(NCS: Network Control Service)
14 Clear DCS Setting Initializes the DCS (Delivery Control Service) settings.
15
Clear UCS Setting
Initializes the UCS (User Information Control Service) settings.
16
MIRS Setting
Initializes the MIRS (Machine Information Report Service)
settings.
17
CCS
Initializes the CCS (Certification and Charge-control Service)
settings.
4. Press Execute, then follow the prompts on the display to complete the
procedure.
5. Make sure that you perform the following settings:
• Execute SP2115 – Laser Beam Pitch Adjustment
• Do the printer and scanner registration and magnification adjustments
( 3.14).
• Do the touch screen calibration ( 3.15).
• Referring to the SMC data lists, re-enter any values, which had been
changed from their factory settings.
• Execute SP3001-002 – ID Sensor Initial Setting
6. Check the copy quality and the paper path, and do any necessary adjustments.
To Next Page
Loading...
Need help?
General
