To Next Page

To Previous Page

Section

6: SCPI command reference Model 2461 Interactive SourceMeter® Instrument

Reference Manual

6-180 2461-901-01 A/November 2015

:TRACe:WRITe:READing

This command allows you to write readings into the reading buffer.

Type Affected by Where saved Default value

Command only Not applicable Not applicable Not applicable

Usage

For buffers with the writable buffer style:

:TRACe:WRITe:READing "<bufferName>", <readingValue>

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>, <fractionalSeconds>

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <seconds>,

For buffers with the full writable buffer style:

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>,

:TRACe:WRITe:READing "<bufferName>", <readingValue>, <extraValue>, <seconds>,

A user-supplied string that indicates the name of the buffer

The first value that is recorded in the buffer index

A second value that is recorded in the buffer index (only valid for buffer style

FULLWRITable)

An integer that represents the seconds

The portion of time that represents the fractional seconds

The reading that is the start of each group of readings:

buffer.STAT_START_GROUP

; can be used to graph a family of curves

Details

This command writes the data you specify into a reading buffer. The reading buffer must be set to the

writable or full writable style, which is set when you make the buffer.

Data must be added in chronological order. If the time is not specified for a reading, it is set to one

integer second after the last reading. As you write the data, the front-panel Home screen updates and

displays the reading you entered.

Keithley 2461 Reference Manual

Other manuals for Keithley 2461