Keithley 2461 Reference Manual

Model 2461
Interactive SourceMeter® Instrument Reference Manual Section 8:
TSP command reference
2461-901-01 A/November 2015 8-47
Example
MaxCount = dataqueue.CAPACITY
while dataqueue.count < MaxCount do
dataqueue.add(1)
end
print("There are " .. dataqueue.count
.. " items in the data queue")
This example fills the data queue until it is full
and prints the number of items in the queue.
Output:
There are 128 items in the data
queue
Also see
dataqueue.add() (on page 8-45)
dataqueue.clear() (on page 8-47)
dataqueue.count (on page 8-48)
dataqueue.next() (on page 8-48)
Using the data queue for real-time communication (on page 3-158)
dataqueue.clear()
This function clears the data queue.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
dataqueue.clear()
Details
This function forces all dataqueue.add() commands that are in progress to time out and deletes all
data from the data queue.
Example
MaxCount = dataqueue.CAPACITY
while dataqueue.count < MaxCount do
dataqueue.add(1)
end
print("There are " .. dataqueue.count
.. " items in the data queue")
dataqueue.clear()
print("There are " .. dataqueue.count
.. " items in the data queue")
This example fills the data queue and prints the
number of items in the queue. It then clears the
queue and prints the number of items again.
Output:
There are 128 items in the data
queue
There are 0 items in the data queue
Also see
dataqueue.add() (on page 8-45)
dataqueue.CAPACITY (on page 8-46)
dataqueue.count (on page 8-48)
dataqueue.next() (on page 8-48)
Using the data queue for real-time communication (on page 3-158)

Keithley 2461 Specifications

General

Brand	Keithley
Model	2461
Category	Measuring Instruments
Language	English