To Next Page

To Previous Page

Model 2461

Interactive SourceMeter® Instrument Reference Manual Section 2:

General operation

2461-901-01 A/November 2015 2-39

Scripts menu

The menus under Scripts in the main menu allow you to configure, run, and manage scripting

operations from the Model 2461 front panel. Scripts are blocks of commands that the instrument can

run as a group. The following topics describe the settings that are available on these interactive

screens.

Scripts Run menu

The Run menu contains a list of scripts that you can select to run immediately. You can

also copy a script to a script that runs each time the instrument power is turned on. You

can access scripts that are in the instrument or on a USB flash drive.

Setting Description

Available Scripts

Displays a list of available scripts that you can select. All scripts

that are saved on the Model 2461 or are on a USB flash drive

inserted into the instrument are listed.

Run Selected

Runs the selected script immediately.

Copy to Power Up

Saves the selected script to a script that runs automatically when

the instrument is turned on. The script is saved with the script

name autoexec.

Scripts Manage menu

The Manage menu allows you to copy scripts to and from the instrument and the USB flash drive.

You can also delete scripts from the instrument or USB flash drive.

Setting Description

Copies a script from the instrument to a USB script. A USB flash

drive must be inserted before you select this option.

Copies a script from a USB flash drive to the instrument. A USB

flash drive must be inserted before you select this option.

Delete

Deletes the script that is selected.

For more information about using scripts with the Model 2461, see Fundamentals of scripting for TSP

(on page 7-4).

Keithley 2461 Reference Manual

Other manuals for Keithley 2461