127
Assignable Fader Section
About the Assignable Fader Section
You can assign any four channels to the assignable fader section. This lets you keep important channels displayed on the top panel at all times.
It can be handy to assign channels that you always want instant access to, such as MASTER, main vocals, and MC mic.
Fader Bank display
[SEL] button
[SOLO] button
Level meter
[MUTE] button
Fader
Name Description
Fader Bank display
This displays information such as the input channel/output bus name and fader value. In the Function mode, it displays
a list of functions and parameter values.
[SEL] button
This selects the input channel/output bus and selects the display target. In the function mode, it selects the function
and manipulates parameters.
[SOLO] button This turns solo on and o for the input channel/output bus.
Level meter This displays the signal level of the input channel/output bus.
[MUTE] button This turns muting on and o for the input channel/output bus.
Fader This operates the fader for the input channel/output bus.
The operation procedures for the assignable fader section are nearly the same as for the fader bank section, except for the following dierences.
5 Layers are not present.
5 Switching layers in the fader bank section has no eect.
5 Scrolling in the fader bank section has no eect.
5 Only two functions are available in the Function mode (ASSIGN FADER and UNASSIGN FADER).
To Next Page
Loading...
Need help?
General
