Scene Memory
181
GLOBAL SCOPE Window
In the GLOBAL SCOPE window, you set the recall range for all scene
memories.
To display the GLOBAL SCOPE window, go to the SCENE window
and tap <GLOBAL SCOPE>.
Recall parameter list
The following four tabs are displayed.
CHANNEL Here you set the input-channel recall range.
DCA/BUS
Here you set the DCA GROUP/output bus/MUTE
GROUP recall range.
FX/GEQ/INS Here you set the FX/GEQ/INSERT recall range.
OTHER Here you set the CHANNEL LINK recall range.
Using Global Scope
1. On the SCENE screen, tap <GLOBAL SCOPE>.
The GLOBAL SCOPE window appears.
2. Tap the tab where you want to set Global Scope
(<CHANNEL tab>, <DCA/BUS tab>, <FX/GEQ/INS tab>, or
<OTHER tab>).
3. At the recall parameter list, turn o parameters you want
to exclude from scene recall.
0“Recall Parameter List” (p. 182)
Selected parameters are all excluded from scene recall.
RECALL PARAMETER Window
In the RECALL PARAMETER window, you set the recall range for
individual scenes.
To display the RECALL PARAMETER window, go to the SCENE
window and tap <FILT>.
Recall parameter list
ALL
Sets parameters on/o for the entire recall
parameter list.
FILTER ON Sets Recall Filter to be enabled/disabled.
CANCEL Discards settings and exits the window.
APPLY Applies settings and exits the window.
The following four tabs are displayed.
CHANNEL Here you set the input-channel recall range.
DCA/BUS
Here you set the DCA GROUP/output bus/MUTE
GROUP recall range.
FX/GEQ/INS Here you set the FX/GEQ/INSERT recall range.
OTHER Here you set the CHANNEL LINK recall range.
Using Recall Filter
1. Go to the SCENE screen and tap <FILT>.
The RECALL PARAMETERS window appears.
2. Tap the tab where you want to set Recall Filter
(<CHANNEL tab>, <DCA/BUS tab>, <FX/GEQ/INS tab>, or
<OTHER tab>).
3. In the recall parameter list, turn o parameters you want
to exclude from scene recall.
0“Recall Parameter List” (p. 182)
Selected parameters are excluded from recall in the scenes selected
in step 1.
To Next Page
Loading...
Need help?
General
