265
Main Specications
Roland M-5000/M-5000C: LIVE MIXING CONSOLE
Processing
Mixing Structure
Up to 128 Audio Paths (combination of INPUT CHANNEL, MAIN,
SUBGROUP, AUX, MIX-MINUS, MATRIX, MONITOR, COMM, OSC,
HEADPHONES)
Inputs
Max 300 (96 kHz), Max 460 (48 kHz / 44.1 kHz)
5 CONSOLE: 16
5 AES/EBU: 4
5 REAC: 40 x 2
5 EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)
5 USB AUDIO: 16
5 DOCK: 2
5 USB RECORDER: 2
5 FX 1L-8R: 16
5 TALKBACK: 2
5 OSC: 2
Outputs
M-5000: Max 296 (96 kHz), Max 456 (48 kHz / 44.1 kHz)
M-5000C: Max 288 (96 kHz), Max 448 (48 kHz / 44.1 kHz)
5 CONSOLE (M-5000): 16
5 CONSOLE (M-5000C): 8
5 AES/EBU: 4
5 REAC: 40 x 2
5 EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)
5 USB AUDIO: 16
5 DOCK: 2
5 USB RECORDER: 2
5 FX 1L-8R: 16
Internal Processing
5 72 bits (xed point, bus summing)
Signal Processing
5 AD/DA Conversion: 24 bit
5 Sampling Rate: 96 kHz, 48 kHz, or 44.1 kHz
Latency
5 Network Latency: 1.6 ms (typ.)
5 Console Latency: 1.1 ms (typ.)
* Network Latency: Total system latency of audio signal from
S-2416 inputs to outputs via M-5000’s REAC ports (A or B).
* Console Latency: Total system latency of audio signal from
console inputs to console outputs.
* Sampling rate: 96 kHz
* Eect: No insert eects
* When a REAC Splitter S-4000D or a switching hub is used in-line
with REAC cables, the network latency will increase by the
amount of processing delay introduced by the splitting device
itself. The actual delay is dependant upon the specications of
the splitting device, though the maximum delay amount for a
single splitting device should be about 200 microseconds.
Connectors
5 INPUT jacks (1–16): XLR-3-31 type (balanced, phantom power)
5 TALKBACK MIC 2 jack: XLR-3-31 type (balanced, phantom power)
5 AES/EBU IN jacks (1/2, 3/4): XLR-3-31 type (balanced)
5 OUTPUT jacks (M-5000: 1–16, M-5000C: 1-8): XLR-3-32 type
(balanced)
5 PHONES 1 jack: Stereo 1/4 inch phone type
5 PHONES 2 jack: Stereo miniature phone type
5 AES/EBU OUT jacks (1/2, 3/4): XLR-3-32 type
5 REAC ports (A, B, SPLIT/BACKUP): RJ-45 EtherCon type, REAC
SPLIT/BACKUP port supports REAC EMBEDDED POWER.
5 WORD CLOCK connector (IN, OUT): BNC type
5 RS-232C connector: DB-9 type
5 MIDI connector (OUT/THRU, IN)
5 USB port (MEMORY): USB type A
5 USB WLAN ADAPTOR port: USB type A
5 USB COMPUTER port: USB type B
5 LAN port: RJ45 type
5 DOCK CABLE port: 10-pin mini DIN type
5 GP I/O port: DB-25 type
5 FOOT SWITCH jacks (1, 2): 1/4-inch TRS phone type
5 LAMP jacks: XLR-4-31 type (M-5000: x 2, M-5000C: x1), LAMP
power: DC +12 V/500 mA
5 EXT.POWER DC IN jack: XLR-4-32 type
* XLR type: 1 GND, 2 HOT, 3 COLD
* Phantom power: DC +48 V (unloaded maximum), 14 mA
(maximum load) (All XLR type inputs)