Organization of the Documentation
The documentation for this unit is organized as follows.
Quick Start
This describes basic matters and procedures necessary for unit operation and quick startup.
Reference Manual (this document)
This adds to the information in Quick Start by describing the operational features on the various screens and other detailed usage methods.
RCS User’s Guide
This describes how to use the M-5000 RCS dedicated remote-control software that runs on a Windows or Macintosh computer.
Remote User’s Guide
This describes how to use the M-5000 Remote dedicated remote-control software that runs on an iPad.
Telnet Reference Manual
This describes how to control the M-5000 over a local area network (TCP/IP protocol), using Telnet.
MIDI Implementation
This describes the MIDI messages that the M-5000 supports.
RS-232C Reference Manual
This describes the RS-232C interface commands that the M-5000 supports.
The PDF-format versions of documentation can be downloaded from the Roland website.
This manual describes the basic matters and basic operation of the M-5000 and M-5000C live mixing consoles.
In descriptions of matters and operation procedures that are common to both the M-5000 and M-5000C, the two models are referred to collectively
as “the M-5000.”
Matters that are specic to only one or the other model are indicated by “M-5000 only” or “M-5000C only.”
When “the M-5000 is depicted” or the like is noted, the description uses the M-5000 as representative of both the M-5000 and the M-5000C.
Ce manuel décrit les éléments de base et le fonctionnement de base des consoles de mixage en direct M-5000 et M-5000C.
Dans les descriptions des éléments et des procédures de fonctionnement qui sont communs à la fois au M-5000 et au M-5000C, les deux modèles
sont désignés collectivement sous le terme « le M-5000. »
Les éléments qui concernent spéciquement l'un ou l'autre modèle sont indiqués par le terme « M-5000 uniquement » ou « M-5000C seulement ».
Lorsque « le M-5000 est décrit » ou toute mention similaire apparaît, la description se réfère au M-5000 pour présenter à la fois le M-5000 et le
M-5000C.