Roland M-5000 Reference Manual

267
Connecting to Your Computer via USB
If you connect the USB COMPUTER connector to your computer,
you can perform audio input and output on 16 channels.
5 Inputting audio playback from the computer to an input
channel
5 Recording audio output from an output bus on the computer
5 Inserting a plug-in eect from the computer into an input
channel or output bus
In order to connect to your computer via USB, you must rst install
the USB driver in your computer.The M-5000’s dedicated driver can
be downloaded from the Roland website.
Refer to the Roland website for details on the operating
requirements. The program and procedure for installing the driver
will dier depending on your system. Carefully read
the Readme.htm le included with the downloaded le.
Inputting Computer Audio
0“Patchbays” (p. 89)
1. Display the popover for making input patchbay settings.
2. Tap <CATEGORY> and select <USB>.
3. Select the USB channel.
Outputting Audio to the Computer
0“Patchbays” (p. 89)
1. Display the popover for making output patchbay settings.
2. Tap <CATEGORY> and select <USB>.
3. Select the USB channel.

Roland M-5000 Specifications

General

Brand	Roland
Model	M-5000
Category	Music Mixer
Language	English