M-48 Control
206
Pasting Settings to Multiple M-48 Units
1. At the M-48 list, select <CHECKBOX> for each M-48 you
want to paste to.
2. Tap <PASTE>.
A popup for selecting the section to paste appears.
3. Select the section to paste.
GROUP MIX This pastes the group mix.
SOURCE LEV/PAN This pastes the source level/pan settings.
ASSIGN This pastes assignment settings to a group.
PREFERENCES This pastes preferences.
CANCEL
This cancels the paste operation and exits the
popup.
4. Tap <PASTE>.
The content you selected in step 3 is pasted to the M-48 you
selected in step 1.
Making Settings for Each M-48
(M-48 SETUP Window)
For a M-48, you use the M-48 SETUP window to make settings.
Displaying the M-48 SETUP window
To display the M-48 SETUP window, go to the M-48 MANAGER
window, and at the M-48 list, tap <SETUP> for the M-48 whose
settings you want to change.
Memo
The M-48 SETUP windows for the respective M-48 units can be
assigned to user-assignable section buttons [
1
] through [8].
To Next Page
Loading...
Need help?
General
