96
HOME Screen
When the M-5000 starts up, the HOME screen (Process View) is
displayed.
You can display information for any eight channels you choose on
the HOME screen. Pressing the [SEL] buttons on the top panel lets
you access input channels and output buses quickly.
0“Switching the HOME Screen/CH EDIT Screen” (p. 129)
HOME Screen
The HOME screen is divided into two main areas.
Channel strips Sidebar
Channel Strips
This shows an overview of the 8 input channels/
output buses in the display target.
Sidebar
Important information you want to monitor at
all times and buttons for accessing important
screens are displayed here.
0“Sidebar” (p. 131)
Displaying the HOME Screen
When another window is displayed, to close the window and
display the HOME screen, press the [VIEW] button.
This quits the window, attendant popovers, and attendant popups
and displays the HOME screen.
(Excludes the MIXER CONFIGURATION window)
Channel Strips
The channel strips displayed on the HOME screen show information
for input channels and output buses. The information displayed
diers depending on whether an input channel, output bus, or DCA
is selected.
Changing the Appearance of a Channel Strip
On the HOME screen, you can select either of two types of
appearances.
Process view Meter view
Process View displays a large amount of information about the
input channel or output bus.
Meter View displays a large meter view.
To change the appearance, press the [VIEW] button on the top
panel while the HOME screen is displayed.
To Next Page
Loading...
Need help?
General
