2.11.2 Installing
– Slide retaining bracket in lock mounting -arrow b-.
– Engage retaining bracket -1- and door lock -2- together
-arrows a-.
2.12 Inner door seal
During production, a sealant is applied to the inner door seals,
which are then placed on the door flange and rolled on.
Note
♦
When seals are removed, the sealant will spread to the inside
of the seal and the flanks will be bent out slightly. If the seal is
then refitted, sealing and firm seating are no longer guaran‐
teed.
♦
Therefore each seal which is removed completely must be re‐
newed with a so-called “tap-on” seal.
♦
If a seal has been partially removed, squeeze sides of seal
together before refitting.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
118 Rep. gr.57 - Front doors, door components, central locking
To Next Page
Loading...
Need help?
General
