1.4.2 Installing
– Slide sliding headlining to rear.
– Run sliding/tilting sunroof glass panel to tilted position.
– Fit boot -1- first at top rear -2-.
– Clip boot -1- with securing pins -4- in guide plate.
– Hook in boot -1- at bottom rear -3- and clip in boot, starting
from front, in lower part of guide plate.
1.5 Removing sliding/tilting sunroof glass
panel
– Remove bellows ⇒ page 179 .
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
180 Rep. gr.60 - Sunroof
To Next Page
Loading...
Need help?
General
