– The seal must not pull into the radii, otherwise the seal will
stretch and compress.
– Press exterior seal on firmly and evenly 2x around circumfer‐
ence using roller - 3356- .
– Install rear glass panel ⇒ page 219 .
– Install front glass panel ⇒ page 215 .
3.10 Removing and installing interior seal
3.10.1 Removing interior seal
– Remove front glass panel ⇒ page 215 .
– Remove rear glass panel ⇒ page 219 .
– Pull interior seal -2- off assembly frame -1-.
– Remove any adhesive residue with adhesive strip remover -
VAS 6349- .
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
3. Panorama sliding sunroof (Arvin-Meritor) 229
To Next Page
Loading...
Need help?
General
