2.14.2 Installing
Release element -1- installation is carried out in reverse order of
removal.
– Specified torque for bolts -3-: 4 Nm.
• Before closing rear lid, check function of lid release compo‐
nents.
2.15 Removing and installing bonnet lock
Note
If the rear lid does not open, there is an emergency manual open‐
ing feature on the rear interior trim panel ⇒ Owners manual .
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
2. Rear lid (saloon) 55