– Cover flange -2- all round with textile-reinforced adhesive
tape.
– Cut through adhesive seal (with glass remains) in window cut-
out using electric cutter - V.A.G 1561 A- and u-shaped blade
- V.A.G 1561- .
WARNING
Always wear safety goggles and leather gloves.
1.14 Installing rear window (estate)
– If fitted, remove roof spoiler ⇒ page 449 .
– Preparing old undamaged window for glazing ⇒ page 335 .
– Preparing new window for glazing ⇒ page 335 .
– Preparing body flange for glazing ⇒ page 336 .
Installation instructions ⇒ page 338
Minimum curing period ⇒ page 341
1.15 Assembly overview - side window (estate)
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
1. Flush bonded windows 331
To Next Page
Loading...
Need help?
General
