1.12 Removing and installing release lever
1.12.1 Removing
– Pull release lever -1- to release bonnet.
– Insert a small screwdriver in gap between release lever -1- and
clip -2-.
– Withdraw clip -2- from release lever -1- and remove release
lever.
1.12.2 Installing
– Push clip -2- completely into release lever -1-.
– Then slide release lever -1- onto mounting in bearing bracket
and engage.
• Before closing bonnet, check function of release lever and
Bowden cable.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
36 Rep. gr.55 - Bonnet, rear lid
To Next Page
Loading...
Need help?
General
