April 2017
2-138
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-509, 016-510, 016-511, 016-512
Launch Issue
Status Indicator RAPs
016-509, 016-510 Image Log No Send Rule RAP
016-509 Because rules for log image transfer are not registered, a job cannot be continued.
016-510 Rules for log image transfer are not registered.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to register rules for transfer from the destination image log control
server to the device.
2. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.
3. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
4. Install a new hard disk, PL 3.10 Item 2.
016-511, 016-512 Image Log Invalid Send Rule RAP
016-511 Rules for log image transfer are illegal, causing a job to be discontinued.
016-512 Rules for log image transfer are illegal.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to overwrite rules for transfer from the destination image log control
server to the device.
2. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.
3. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
4. Install a new hard disk, PL 3.10 Item 2.
To Next Page
Loading...
Need help?
General
