Xerox VersaLink B7030 Service Manual

April 2017
2-462
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
061-361, 062-277
Launch Issue
Status Indicator RAPs
061-361 LPH Configuration RAP
BSD-ON: BSD 6.4 Laser Control
061-361 The model number of the installed LPH does not match. It may also be a memory
error in the LPH.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. Switch off, then switch on the machine, GP 10.
2. Check that a valid LPH is installed.
3. If the fault persists, install new components as necessary:
• Print head assembly, PL 60.35 Item 1.
• ESS PWB, PL 3.10 Item 6.
062-277 DADF Communication Fail RAP
BSD-ON: BSD 3.5 PWB Communications (ESS PWB to DADF)
062-277 Communications cannot be established between the ESS PWB and the DADF PWB.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. Switch off, then switch on the machine, GP 10.
2. Check the connections and wiring between the ESS PWB ( P/J750) and the DADF PWB (
P/J751) for an open circuit, short circuit or poor contact.
3. If the fault persists, install new components as necessary:
• DADF PWB, PL 5.10 Item 11.
• ESS PWB, PL 3.10 Item 6.

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English