April 2017
2-181
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-715, 016-716
Status Indicator RAPs
Launch Issue
016-715 ESCP Form Invalid Password RAP
016-715 Unable to access the ESCP form because ESCP form password did not match
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to input the correct password to use ESCP form.
2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected.
Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.
016-716 TIFF Data Overflow RAP
016-716 The system detected that the files to be spooled in TIFF exceeded the disk capacity.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected.
Ensure all surface mounted modules are securely connected.
2. Reload the software, GP 4.
3. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.
4. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
5. Initialize the Sys - System NVM, refer to dC301.
6. Install a new hard disk, PL 3.10 Item 2.
7. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.
To Next Page
Loading...
Need help?
General
