April 2017
4-167
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 70.5, REP 70.6
Repairs and Adjustments
Launch Issue
Replacement
The replacement is the reverse of the removal procedure. Refer to Figure 6.
Figure 6 Replacement
REP 70.6 HCF Tray Front Cables
Parts List on PL 70.51
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the HCF tray front cover, PL 70.50 Item 7.
2. Free movement of the front tray cable pulley, Figure 1.
a. Remove the E-ring (1) on the lift shaft.
b. Slide the bearing (2) to the rear on the lift shaft.
c. Front tray cable pulley (3).
Figure 1 Tray cable pulley
Tray cable
Bottom plate
To Next Page
Loading...
Need help?
General
