April 2017
2-34
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-973, 003-974
Launch Issue
Status Indicator RAPs
003-973 Image Rotation RAP
003-973 The document and the image are different in orientation (except when poster is spec-
ified). When rotation is not available even though the orientation of the document and the
image are different and part of the image will be lost if it is not rotated.
Procedure
Perform the steps that follow:
1. Advise the customer to verify the image loss and use a larger paper size if available. Or
use reduction to make a smaller document, then retry the job.
2. If the fault persists, reload the software, GP 4.
003-974 Next Original Specification RAP
003-974 Next document specified. Scanning has been completed for all loaded documents.
Procedure
Perform the steps that follow:
1. Ask the customer to verify that scanning is complete or if other documents should be
loaded.
2. If the fault persists, reload the software, GP 4.
To Next Page
Loading...
Need help?
General
