Xerox VersaLink B7030 Service Manual

April 2017
4-187
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 80.10, REP 80.11
Repairs and Adjustments
Launch Issue
2. Remove the 3TM PWB, Figure 2:
a. Disconnect six connectors (1).
b. Remove four screws (2).
c. Remove the 3TM PWB (3).
Figure 3 3TM PWB removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. If a new 3TM PWB is installed, change the value of NVM ID 742-205 to '1'.
REP 80.11 3TM Takeaway Motor
Parts List on PL 70.23
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the rear cover, Figure 1:
a. Remove four screws (1).
b. Remove the rear cover.
Figure 1 Rear cover removal

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English