Xerox VersaLink B7030 Service Manual

April 2017
4-226
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
ADJ 5.1, ADJ 5.2
Launch Issue
Repairs and Adjustments
Figure 3 Direction B
3. Reinstall the DADF rear cover.
4. After adjustment, perform ADJ 5.2 DADF Side Edge Registration and ADJ 5.3 DADF
Lead Edge Registration.
ADJ 5.2 DADF Side Edge Registration
Purpose
To correct DADF side edge registration.
Initial Actions
NOTE: For a description of the print/copy orientation definitions, refer to GP 31 Print/Copy Ori-
entation Definitions.
Before performing this procedure, perform the procedures that follow:
1. dC126 System Registration.
2. ADJ 60.3 IIT Side Edge Registration.
3. ADJ 5.1 DADF Lead Edge Skew.
Side 1 Check
1. Place the test pattern 82E2010 (A4) or 82E2020 (8.5 x11inch) face up in the DADF input
tray. Ensure that the document guides are correctly adjusted.
2. Make a simplex copy.
3. Figure 1, use the grids A to measure the side edge displacement. Check that the side
edge registration error is within +/- 2.1 mm (0.082 inch).

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English