April 2017
4-132
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 13.37, REP 13.38
Launch Issue
Repairs and Adjustments
5. Remove the stapler, Figure 4:
a. Release the harness from the clamp (1).
b. Disconnect the connector (2).
c. Remove three screws (3).
d. Remove the stapler (4).
Figure 4 Stapler removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 13.2 Booklet Folding and Stapling Position.
REP 13.38 Booklet Stapler Move Motor
Parts List on PL 13.55
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the booklet maker assembly, REP 13.31.
2. Remove the cover for the booklet stapler move motor, Figure 1:
a. Remove the screw (1).
b. Remove the cover (2).
Figure 1 Cover removal
To Next Page
Loading...
Need help?
General
