April 2017
2-517
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-392, 116-396
Status Indicator RAPs
Launch Issue
116-392 Machine Code Check Fail RAP
116-392 Machine code check fail.
Procedure
For information only. No service action necessary.
116-396 FIPS140 Self Test Fail RAP
116-396 At start, the FIPS140 encryption module self-test has detected a failure. Self test error
due to illegal ROM (FW).
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Reload the software, GP 4.
To Next Page
Loading...
Need help?
General
