April 2017
2-139
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-513, 016-514
Status Indicator RAPs
Launch Issue
016-513 SMTP Server Reception Error RAP
016-513 Error when receiving response from the SMTP server (after connecting to the server).
Procedure
Perform the steps that follow:
1. Advise the customer to wait 5 minutes before resubmitting the job.
2. Check that SMTP send port number is correct.
016-514 XPS Error RAP
016-514 During XPS Bridge processing, invalid schema, parameter error, damage to XPS file,
or an error internal to XPS decomposer occurred.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected.
Ensure all surface mounted modules are securely connected.
2. Reload the software, GP 4.
3. If the fault persists, perform the 016A Scan to Network Error Entry RAP.
To Next Page
Loading...
Need help?
General
