April 2017
4-138
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 28.5, REP 28.6
Launch Issue
Repairs and Adjustments
REP 28.5 Upper Rear Cover
Parts List on PL 28.06
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the upper rear cover, Figure 1:
a. Remove ten screws (1).
b. Remove the upper rear cover (2).
Figure 1 Upper rear cover removal
Replacement
The replacement is the reverse of the removal procedure.
REP 28.6 Lower Rear Cover
Parts List on PL 28.06
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the upper rear cover, REP 28.5.
2. Remove the cover (1), disconnect all connectors (2), Figure 1.
Figure 1 Connector
To Next Page
Loading...
Need help?
General
