Xerox VersaLink B7030 Service Manual

April 2017
4-175
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 70.11, REP 70.12
Repairs and Adjustments
Launch Issue
REP 70.11 Tray 1 Assembly
Parts List on PL 70.05
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove tray 1.
2. Remove the tray 1 RAI cover, PL 70.05 Item 10.
Replacement
1. Install the RAI cover onto the new tray 1.
2. Install the new tray 1 assembly.
REP 70.12 Takeaway Clutch and Lock Bearing
Parts List on PL 40.10
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the drive assembly, REP 40.1.
2. Prepare to split the drive assembly, Figure 1:
a. Disconnect the inline connector (1).
b. Remove six screws (2).
Figure 1 Preparation

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English